This fact sheet has been developed to support the implementation of the Natural Resources Conservation Service Feed Management 592 Practice Standard. The Feed Management 592 Practice Standard was adopted by NRCS in 2003 as another tool to assist with addressing resource concerns on livestock and poultry operations. Feed management can assist with reducing the import of nutrients to the farm and reduce the excretion of nutrients in manure.
The Natural Resources Conservation Service has adopted a practice standard called Feed Management (592) and is defined as “managing the quantity of available nutrients fed to livestock and poultry for their intended purpose”. The national version of the practice standard can be found in a companion fact sheet entitled “An Introduction to Natural Resources Feed Management Practice Standard 592”. Please check in your own state for a state-specific version of the standard.
The national Feed Management Education team has developed a systematic 5-step development and implementation process for the Feed Management Practice Standard as shown in figures 1 and 2. The steps of the flow diagram were chosen to coincide with the sections of the Feed Management Practice Standard. The first step focuses on defining the purpose(s) for considering the Feed Management Standard on a particular farm, either to: 1) feed to minimize excess nutrients in manure while maintaining production, performance, and reproduction, or 2) feed to improve net farm income by feeding more efficiently.
Please check this link first if you are interested in organic or specialty dairy production
Why Consider Feed Management?
The first step focuses on defining the purpose(s) for considering the Feed Management Standard on a particular farm, either to: 1) feed to minimize excess nutrients in manure while maintaining production, performance, and reproduction, or 2) feed to improve net farm income by feeding more efficiently.
Key participants at step 1 would be the producer, the nutrient management planner, and NRCS staff.
Where Does the Practice Apply?
The second step of the flow diagram focuses on identifying the conditions where the practice applies and making an initial assessment of the opportunity for the full development of a Feed Management Plan. The conditions where the practice applies as noted the in 592 standard include:
- Whole farm imbalance
- Soil nutrient build-up
- Land base not large enough, or
- Seeking to enhance nutrient efficiencies.
After defining the condition(s) for use of the 592 standard, an opportunity checklist is then used make an initial assessment of developing a complete feed management plan. The opportunity checklist can be found in a companion fact sheet entitled “Use of the Opportunity Checklist in Feed Management Plan Development”. The Opportunity Checklist can be found in species specific versions for beef, dairy, poultry and swine.
Key participants at step 2 would be the producer, the nutrient management planner, and NRCS staff.
How Do We Reduce Manure Nutrients?
The third step of the flow diagram focuses on the question of “how to reduce nutrients on manure used on the farm”. This step will not be considered by all farms. Two major ways that a reduction in on-farm manure nutrients can be achieved is through feed ingredient and exporting manure off-farm. Making the decision to make a ration change vs. moving manure off-farm has major economic implications.
An electronic decision aid tool has been developed to assist with this decision. The tool is called FNMP$ and a description and set of instructions can be found in a companion fact sheet entitled “Feed Nutrient Management Planning Economics (FNMP$)…Connecting Feed Decisions with Crop Nutrient Management Plans”. This spreadsheet tool estimates the quantity of manure nitrogen, phosphorus, and solids excreted based upon user inputs of feed program and animal performance (based upon procedures contained within ASABE Standard D384.2). In addition, using procedures defined in USDA Natural Resources Conservation Service publication “Agricultural Waste Management Field Handbook”, an estimate of harvested and crop available nutrients are estimated. This information is then used to develop an estimate of:
- land requirements for agronomic utilization of the manure
- time requirements for land application
- costs associated with land application and potential nutrient value (N and P only) of manure.
Key participants at step 3 would be the producer, the nutrient management planner, and the nutritionist.
Develop the Feed Management Plan
The fourth step of the flow diagram focuses on the development of the feed management plan. The key tool to assist with the writing of the plan is the Feed Management Plan (FMP) Checklist. The FMP checklist can be found in a companion fact sheet entitled “Use of the Feed Management Plan Checklist in Feed Management Plan Development”. The Feed Management Plan Checklist can be found in species specific versions for beef, dairy, poultry and swine.
A national Feed Management Plan template has been developed and can be found in the companion fact sheet entitled “National Feed Management Plan Template”.
Key participants at step 4 would be the producer and the nutritionist.
Implement and Monitor the Plan
The fifth and final step of the flow diagram focuses on Feed Management Plan implementation and monitoring. This step focuses on implementing those practices that will help achieve the purpose(s) that were selected at step 1. In addition, review dates are established so that the FMP will be utilized as an active management tool.
It is important that the outcomes of the feed management plan as it relates to manure volume and nutrient composition are communicated to the nutrient management planner as this may affect cropping recommendations.
Key participants at step 5 would be the producer and the nutritionist.
Following the five steps to the development and implementation of a feed management plan, can provide the basis for thoroughly evaluating the merits of feed management in relation to nutrient management at the whole farm level. Clear and frequent communication with everyone managing nutrients on the farm will be a key factor to the success of the feed management plan.
“Extension programs and policies are consistent with federal and state laws and regulations on nondiscrimination regarding race, sex, religion, age, color, creed, national or ethnic origin; physical, mental or sensory disability; marital status, sexual orientation, or status as a Vietnam-era or disabled veteran. Evidence of noncompliance may be reported through your local Extension office.”
Feed Management Plan Implementation and Development Flow Charts
This fact sheet reflects the best available information on the topic as of the publication date. Date 5-25-2007
This Feed Management Education Project was funded by the USDA NRCS CIG program. Additional information can be found at Feed Management Publications.
This project is affiliated with the Livestock and Poultry Environmental Learning Center.
Detailed information about training and certification in Feed Management can be obtained from Joe Harrison, Project Leader, firstname.lastname@example.org, or Becca White, Project Manager, email@example.com.
J. H. Harrison firstname.lastname@example.org, and R. A. White, Washington State University
A Sutton and Todd Applegate, Purdue University
Galen Erickson and Rick Koelsch, University of Nebraska
R. Burns, Iowa State University